Filter
Top Products
Troubleshooting Symptom Charts/Floppy Drive
(Continued)
- 12
Floppy Drive
(Continued)
Disk does not eject 1 Switch off system and hold trackpad button down while you
switch system on.
2 Eject disk manually by carefully inserting opened paper clip
into hole near floppy drive slot.
3 If PowerBook serial number is between FC410 and FC414 or
between CD412 and CK414, replace floppy drive.
4 Check floppy drive cable connection.
5 Reinstall floppy drive brackets. (Refer to “Floppy Drive” in
Take Apart.)
6 Replace floppy drive cable.
7 Replace floppy drive.
8 Replace motherboard.