Apple G3 Series Modem User Manual


 
Replacement Instructions
Be sure to follow the instructions in this sheet carefully. Failure to follow these instructions could result in damage to your
equipment and may void your warranty.
Tools Required
• Phillips screwdriver.
• Flat-blade nylon tool.
Electrostatic Discharge (ESD)
Static electricity, a normal and natural phenomenon, builds up on your body as you walk around. You experience an electro-
static discharge (ESD) when you touch an object and feel a spark. ESD can cause damage to the internal components of your
computer. Avoid walking around while performing this procedure, and follow the instructions carefully when you are asked to
discharge static electricity.
Removing the Installed Modem
1. Place your computer on a clean, flat surface.
2. Shut down your computer, remove the battery from the expansion bay, and disconnect the power adapter.
Warning : Always turn off your computer before opening it to avoid damaging its internal components.
The internal components of your PowerBook may be hot. If you have been using your PowerBook, wait 30 minutes after
shutting down your computer to let the internal components cool down before continuing.
3. Make sure that the keyboard locking screw is not in the locked position. Your new PowerBook comes with the keyboard
unlocked, so unless you or someone else locked the keyboard, you can skip this step.
4. Release the keyboard by pulling down on the keyboard release tabs (located to the left of the F1 and F9 keys) until the top
portion of the keyboard pops up.
1PowerBook G3 Series Bronze Keyboard - Modem
English
English
Modem
AppleCare