Filter
Top Products
Mac mini (Mid 2010) Take Apart — Logic Board 116
2010-08-03
Removal
Important: The small
JST connectors (C, D, E,
F) are extremely fragile.
Use extreme care and
nesse to lift them
carefully straight up
and out of their sockets
on the logic board.
See Vertical Insertion
(JST) instructions in
the General Information
section of the Take Apart
chapter.
Note: Some of
these cables are not
replaceable and require
drive replacement if
damaged.
1 Carefully disconnect
the cables connected
to the logic board.
A - Hard drive ex cable
B - Optical drive or Server
bottom hard drive
ex cable
C - Ambient thermal
sensor (on top hard
drive data cable)
D - Top hard drive
thermal sensor
E - Optical drive or Server
bottom hard drive
thermal sensor
F - Infrared board cable