Filter
Top Products
Mac mini (Mid 2010) Take Apart — Optical Drive / Hard Drive (Server) 140
2010-08-03
3 Remove 4 T8 screws
in the drive carrier:
• 922-9583
Server Note: For the
lower hard drive on the
server, the screws are
located in front and back
of the carrier.
• 922-9585
4 Lift the drive from the
carrier.
5 If replacing the
optical drive ex
cable, install and align
the cable carefully.
Apply the straight
edge of the included
tape to the ex
connector then fold
over onto the top
of the ex cable to
secure to the drive.
Server Note: To install
the bottom hard drive
ex cable, connect it
to the hard drive, then
re-use the black tape,
if any, to secure the
connector to the top
of the hard drive.