Filter
Top Products
QLS-4100 X 42
Menu Functions
The following list outlines all of the menus that are accessable via the user inter-
face. Some menus, as noted, are only accessible when the printer has been
paused using the PRINT/PAUSE key. Some menus, like the Cutter menus, are
only available when a specific option has been enabled or is in use.
The following menus are available when printer is in a Ready or Pause state:
Menu Possible Values
• Speed 2 - 7 inches/sec
• Intensity 1 - 32
• Print Offset -1200 to +1200 dots
• Counter Off - Batch - Total
• Windows Print 1 - 999 labels
(available only when Windows Mode is enabled)
• Mirror Mode Off or On
(available only when Windows Mode is disabled)
• Cut Flag Off or On
• Cut Offset -1200 to +1200 dots
• Print Line Adj. -240 to +240 dots (heads 1 - 4)
• Cross Web Adj. -16 to +16 dots (heads 1 - 3)
The following menus are available only when printer is in a Pause state:
Menu Possible Values
• TTR Sensor Enabled, Disabled
• Calibrate Gap, Reflective, Continuous
• Test Print Test Pattern 1”, 2”, 3”, 4”, 5”
Block Pattern (All)
Proc. Block (CMYK)
Proc. Block (KCMY)
Horiz. Line Pattern
• Factory Reset None
• Sys Upgrade None
• QLS Settings None
• System Baseline -120 to +120 dots
• TTR/Media Standard, Resin/Synthetic
• TTR Drop 0 to +40 mm (heads 1 - 4)