Filter
Top Products
4-164-16
4-164-16
4-16
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
Enhanced Mode Support On [S-ATA]
The default setting S-ATA allows you to use native OS on Serial ATA
and Parallel ATA ports. We recommend that you do not change the
default setting for better OS compatibility. In this setting, you may
use legacy OS on the Parallel ATA ports
only ifonly if
only ifonly if
only if you did not install any
Serial ATA device.
The P-ATA+S-ATA and P-ATA options are for advanced users only. If
you set to any of these options and encounter problems, revert to the
default setting
S-ATAS-ATA
S-ATAS-ATA
S-ATA. Configuration options: [P-ATA+S-ATA]
[S-ATA] [P-ATA]
IDE Detect Time Out [35]IDE Detect Time Out [35]
IDE Detect Time Out [35]IDE Detect Time Out [35]
IDE Detect Time Out [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
IDE Port Settings [Primary P-ATA+S-ATA]
Allows selection of the IDE ports to activate if you are using a
legacylegacy
legacylegacy
legacy
operating system. Set to [Primary P-ATA+S-ATA] if you wish to use
the primary Parallel ATA and Serial ATA ports, or set to [Secondary
P-ATA+SATA] to enable the secondary P-ATA port instead. Setting to
[P-ATA Ports Only] disables the two Serial ATA ports supported by
ICH5. Configuration options: [Primary P-ATA+S-ATA] [Secondary
P-ATA+S-ATA] [P-ATA Ports Only]
The
Enhanced Mode Support OnEnhanced Mode Support On
Enhanced Mode Support OnEnhanced Mode Support On
Enhanced Mode Support On appears only when the item
Onboard IDE Operate ModeOnboard IDE Operate Mode
Onboard IDE Operate ModeOnboard IDE Operate Mode
Onboard IDE Operate Mode is set to
Enhanced ModeEnhanced Mode
Enhanced ModeEnhanced Mode
Enhanced Mode.
The
IDE Port SettingsIDE Port Settings
IDE Port SettingsIDE Port Settings
IDE Port Settings appears only when the item
Onboard IDEOnboard IDE
Onboard IDEOnboard IDE
Onboard IDE
Operate ModeOperate Mode
Operate ModeOperate Mode
Operate Mode is set to
Compatible ModeCompatible Mode
Compatible ModeCompatible Mode
Compatible Mode.