Filter
Top Products
2-44 Chapter 2: Hardware information
Installing the optional fan
1. Position the fan above the pipe
and heatsink assembly.
2. Fit the grooved edge to the
heatsink.
3. Carefully push down the fan until
it snugly ts the heatsink, then
connect the fan cables.
•
Plug the optional fan cables to the NB_FAN and/or PWR_FAN connector
on the motherboard.
•
Make sure the optional fan is installed correctly to prevent damage to the
fan and motherboard components.
Do not tilt the fan.
Do not install the fan with its rear side
facing you.
Install the optional fan only if you are using a passive cooler or a water cooler.
Installing the optional fan with an active CPU cooler will interfere with the airow
and destabilize the system.