Filter
Top Products
6-18
Chapter 6: Driver installation
4. Insert the RAID driver disk to the floppy disk drive. Make sure that Installation
from the Boot Options menu is selected, then press <Enter>.
F1 Help F2 Language F3 1280 x 1024 F4 DVD F5 Driver
Boot from Hard Disk
Installation
Installation--ACPI Disabled
Installation--Local APIC Disabled
Installation--Safe Settings
Rescue System
Memory Test
Boot Options |
5. When below screen appears, select the floppy disk drive (fd0) as the driver
update medium. Select OK, then press <Enter>.
Please choose the Driver Update medium.
OK Back
fd0: Floppy
sr0: CD-ROM, TEAC DV-516E
sda: Disk, SEAGATE ST336754SS
sdb: Disk, SEAGATE ST336754SS
Other device
The drivers for the RAID controller are installed to the system.
If you install SLES 10, type
brokenmodules=ahci
after
Boot Options
and
press
Enter
to continue.