Filter
Top Products
Cajun P550/P880/P882 Switch User Guide
Using VLANs, Spanning Tree, Hunt Groups, and VTP Snooping
4-19
Figure 4-12. Switch Port Configuration Dialog Box
4. Select Disable from the Spanning Tree Mode pull-down
menu.
5. Click APPLY to disable spanning tree mode on the port, or
CANCEL to keep spanning tree mode Enabled on the port.
Disabling
Spanning Tree
Mode on a Port
Using the CLI
To Disable Spanning Tree mode on a port using the CLI, enter the
following command from Configure mode:
> set port spanning-tree-mode <mod-num> disable
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.