Filter
Top Products
Cajun P550/P880/P882 Switch User Guide
Using VLANs, Spanning Tree, Hunt Groups, and VTP Snooping
4-35
8. Select VTP Snooping from the L2 Switching > VLANs group
on the web agent window. The VTP Snooping Configuration
window opens (see Figure4-26).
Figure 4-26. VTP Snooping Configuration Window
9. Refer to Table4-8 and configure the VTP Snooping
parameters.
10. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Table 4-8. VTP Snooping Parameters
Parameter Definition
VTP Snooping State Select to Enable to enable VTP snooping
globally for the switch. The default value is
Disable.
Domain Name Enter the name associated with the Cisco VTP
domain. The default is Null.
Note: The domain name is automatically
learned from a Cisco VTP switch
provided both the Domain Name is
Null and the VTP Snooping State is
enabled on the Cajun switch.
Configuration
Revision Number
Displays the VTP snooping configuration
revision number associated with the last
successful VTP configuration update on the
Cajun switch.
Updater Identity Displays the IP address of the Cisco switch that
initiated the configuration update.
Update Timestamp Displays the date and time that the Cisco
switch initiated the configuration update.