Filter
Top Products
Cajun P550/P880/P882 Switch User Guide
Configuring IP Routing
9-7
5. Click CREATE to save your changes, or CANCEL to restore
previous settings.
IP Routing Select enable or disable IP routing on the interface.
Options include:
• Routing/Mgmt - Enables you to manage the
switch, from the Command Line Interface
(CLI) or the Web Agent, and configure IP
routing for the switch.
• Mgmt Only - Enables you to manage the
switch, however, IP routing is disabled.
• Default - Enables you to configure IP routing
for the switch, however, you cannot manage
the switch.
Note: When you set up IP routing for an interface,
the Default selection is automatically
chosen. The IP interface is created with the
default IP routing option on the VLAN
associated with the interface.
RIP Enable or disable RIP. The default value is Disable.
OSPF Enable or disable OSPF. The default value is Disable.
Multicast
Protocol
Specify the multicast protocol for the interface.
Options include:
• None
• DVMRP
• IGMP
Proxy ARP Enable or disable Proxy ARP. The default value is
Disable.
ICMP Redirect Enable or disable ICMP Redirect (IDRP). The default
value is Enable.
NetBIOS UDP
Rebroadcast
Enable or disable NetBIOS UDP Rebroadcasts. The
default value is Disable.
VRRP Enable or disable Virtual Redundancy Router
Protocol. The default value is Disable.
BOOTP/DHCP
Relay Gateway
Enable or disable the BOOTP/DHCP Relay Agent.
The default value is Disable.
Table 9-2. Add IP Interface Dialog Box Parameters continued
Parameter Allows you to...