Filter
Top Products
9-72
Chapter 9
Cajun P550/P880/P882 Switch User Guide
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
Creating a VRRP
Virtual Router
Router Using
the CLI
To create a VRRP router from the CLI, enter the following command
in Configure mode:
>(config-if:ethernet)# router vrrp
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Displaying VRRP Statistics
You can display VRRP router statistics using either the web agent or
the CLI.
Displaying VRRP
Router Statistics
using the Web
Agent
To view VRRP virtual router statistics using the web agent:
1. Select VRRP Statistics from the Routing > IP > Display group
on the web agent window. The VRRP Virtual Router Statistics
dialog box opens (Figure9-34).
Figure 9-34. VRRP Virtual Router Statistics Dialog Box
2. To modify the VRRP statistics:
— Click CLEAR to reset all the entries.
— Click REFRESH to receive the most up-to-date
information on the entries.
Auth Key The VRRP authentication key for the interface. The default is
AVAYA.
Addr Owner
Override
The address owner override.
Table 9-31. Add VRRP Virtual Router Dialog Box Parameters continued
Parameter Defines...