Filter
Top Products
Cajun P550/P880/P882 Switch User Guide
Configuring the Routing Information Protocol (RIP)
10-7
Figure 10-4. Add Trusted RIP Neighbors Dialog Box
3. Enter the network address for the node that acts as the
trusted RIP neighbor in Network Address field.
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
Creating Trusted
RIP Neighbors
Using the CLI
To create a trusted RIP neighbor using the CLI enter the following
command from Configure mode:
> (configure)# route rip <cr>
> (configure router rip)# neighbor <ip-addr>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Viewing RIP Statistics
You can view RIP statistics using either the web agent or the CLI.
Viewing RIP
Statistics Using
the Web Agent
To view RIP statistics using the web agent:
1. Select Interface Statistics from the Routing> IP > RIP group
on the web agent window. The RIP Interface Statistics dialog
box opens (Figure10-5).
Figure 10-5. RIP Interface Statistics Dialog Box