Filter
Top Products
14-2
Chapter 14
Cajun P550/P880/P882 Switch User Guide
2. Refer to Table14-1 to configure the IPX SAP Interface dialog
box parameters:
Table 14-1. IPX SAP Interface Dialog Box Parameters
Parameter Allows you to...
Select Select a SAP interface to modify.
Interface Identifies the IPX interface associated with the
SAP interface.
Network Number Identifies the number of the IPX network
associated with the interface.
Use Interpacket
Gap
Select one of the following from the pull-down
menu:
• Disable – if you do not want the IPX SAP
periodic update packets to be sent out over
an interface with no interpacket
transmission delay.
• Enable – If you want to send the IPX SAP
periodic update packets to be sent out over
an interface with an interpacket transmission
delay (default).
Use Max Packet
Size
Select one of the following from the pull-down
menu:
• Disable – To limit SAP packets to 7 service
entries
• Enable – To allow SAP) packets to contain
the maximum number of services entries
that are allowed by the SAP Interface MTU
(default).
Periodic Update
Interval (sec)
Enter (in seconds) the interval at which periodic
SAP updates are sent out an interface.
Aging Interval
Multiplier
Enter the length of time that information from
received SAP updates are kept as a multiplier of
the Periodic Update Interval.