Filter
Top Products
14-12
Chapter 14
Cajun P550/P880/P882 Switch User Guide
e. Select Inbound from the Direction pull-down menu.
f. Select Enable from the Filter/Suppress pull-down menu.
g. Enter 0 in the Hops field. Entering 0 ensures that there is
no override in the transmission of data on the network.
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
Creating IPX
SAP Network
Filters Using the
CLI
To create IPX SAP Network filters using the CLI, enter the following
command from Interface mode:
cajun(config if-<interface name>)# ipx
sap-network-filter <precedence> <filter-network>
<service-type> {outbound|inbound | both}
{filter|allow} [<filter-hops>]
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Interpreting IPX SAP Interface Statistics
You can interpret IPX SAP interface statistics using either the web
agent or the CLI.
Interpreting IPX
SAP Interface
Statistics Using
the Web Agent
To interpret IPX SAP interface statistic using the web agent:
1. Select Interface Statistics from the Routing > IPX > SAP group
on the Web Agent window. The IPX SAP Interface Statistics
dialog box opens (Figure14-6).
Figure 14-6. IPX SAP Interface Statistics Dialog Box