Filter
Top Products
16-18
Chapter 16
Cajun P550/P880/P882 Switch User Guide
Creating Static
Client Ports
Using the CLI
To create a static client port using the CLI, enter the following
command from Configure mode:
cajun(configure)# set intelligent-multicast
static-client-port <group-address|mac-address>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Deleting Static Client Ports
You can delete static client ports from either the web agent or the
CLI.
Deleting Static
Client Ports
Using the Web
Agent
To delete static client ports using the web agent:
1. Select Static Sessions from L2 > Intelligent Multicast group on
the web agent window. The Static Multicast Sessions dialog
box opens (Figure16-5).
2. Select the number from the Static Client Ports column. The
Static Multicast Sessions Client Ports dialog box opens
(Figure16-8).
3. Select a port and click DELETE to remove the static client
port, or CANCEL to restore previous settings.
Deleting Static
Client Ports
Using the CLI
To delete static client ports using the CLI, enter the following
command from Configure mode:
cajun(configure)# clear intelligent-multicast
static-client-port <group-address|mac-address>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Configuring Internet Group Management
Protocol (IGMP) Snooping (Multilayer only)
This section provides the following procedures:
■ Enabling IGMP Snooping
■ Configuring IGMP Snooping