Filter
Top Products
17-14
Chapter 17
Cajun P550/P880/P882 Switch User Guide
Viewing Event
Statistics Using
the CLI
To view event statistics using the CLI, enter the following command
from User mode:
cajun show logging <num-events>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about these commands.
Setting Log Size
You can set the log size using either the web agent or the CLI.
Setting Log Size
Using the Web
Agent
To set the log size using the web agent:
1. Select General Events from the Events group on the web
agent window. The General Event Management dialog box
opens (Figure17-4).
2. Select the number of entries you want to store in each of the
switch event logs from the Event Log field pull-down menu.
3. Refer to Table17-6 for an explanation of the Event Log and
Shutdown Log parameters on the General Event
Management dialog box:
Table 17-6. Event Log and Shutdown Log Fields Parameters
Log Purpose
Event Log A detailed, ongoing record of syslog messages that are
stored in the router's history table. This log is stored in
memory and is erased if the system shuts down or
reboots.
Shutdown
Log
Contains a list of events that occurred before the last
time the switch was shutdown. Because this log is
stored in nonvolatile memory, it is preserved during a
switch reboot or shutdown. It is designed to help you
analyze the events that occurred immediately prior to a
switch shutdown or reset.