Filter
Top Products
Chapter 1: Product Overview 3
• Reduced Airflow: Installation of the equipment in a rack should be such that the amount of air-
flow required for safe operation of the equipment is not compromised.
• Mechanical Loading: Mounting of the equipment in the rack should be such that a hazardous
condition is not achieved due to uneven mechanical loading.
• Circuit Overloading: Consideration should be given to the connection of the equipment to the
supply circuit and the effect that overloading of circuits might have on overcurrent protection
and supply wiring. Consider equipment nameplate ratings for maximum current.
• Reliable Earthing: Reliable earthing of rack mounted equipment should be maintained. Pay
particular attention to supply connections other than direct connections to the branch circuit
(for example, use of power strips).
Using AVWorks Software
The AVWorks cross-platform management application may be used to manage CCM appliances
and access attached devices. Using AVWorks software, you may perform most of the operations
that are described in this manual. This manual describes how to manage a CCM appliance by
entering commands using the CLI. The AVWorks Installer/User Guide describes how to manage a
CCM appliance using the graphic interface.