Filter
Top Products
76 CCM Installer/User Guide
Show Commands
The Show command has several forms, as listed in Table 5.28.
A Show command display may span more than one screen. See Command displays on page 46 for
more information.
Show NFS command
The Show NFS command displays NFS configuration information and the current mount status. If
a mount error occurred, the display also includes the error message returned by the NFS server.
AUTH=<auth>
SSH authentication methods. You must enter the entire value; abbreviations are not
permitted. Valid values are:
PW Password authentication.
KEY Key authentication.
PW|KEY Password or key authentication.
KEY|PW Key or password authentication.
PW&KEY Password and key authentication.
KEY&PW Key and password authentication.
Default = PW
Table 5.27: Server SSH Command Parameters (Continued)
Parameter Description
Table 5.28: Show Command Summary
Command Description
Show NFS Displays NFS mount status and configured values.
Show NTP Displays configured NTP values.
Show Port Displays port information.
Show Port In/Out Displays how carriage returns and linefeeds are treated.
Show Server Displays CCM configuration information and statistics.
Show Server CLI Displays CCM CLI settings.
Show Server PPP Displays CCM PPP settings.
Show Server RADIUS Displays CCM RADIUS settings.
Show Server Security Displays CCM authentication, connection and security lock-out settings.
Show Server SNMP Displays SNMP configuration information.
Show User Displays user configuration and session information.