Barco HDX W20 Projector User Manual


 
8. Input
3G-A and 3G-B:
Direct Mapping (3G-A)
Dual HD (3G-B)
When Dual HD is selected, it is possible to use Swap links. If Swap links must be used, use the or key to select and press
ENTER to accept. The check box will be checked.
Dual HD :
Swap links
8.3.5 5 cable input
How to select
Select 5 cable and press ENTER to open the selections
Image 8-11
Advanced settings, 5-cable
Image 8-12
5 cable conguration
Use the or key to select the desired conguration and press ENTER to select.
When e.g. CVBS/S-VIDEO AUTO is selected, the projector discovers itself which type of signal is connected to it and loads the
correct settings.
For RGB selections, advanced settings are possible. To adjust these advanced settings, use the or key to select Advanced
settings and press ENTER. The advanced settings menu opens:
Press ENTER to toggle between [Analog] and [TTL].
8.3.6 HDMI - DisplayPort input (3D input module)
How to select
Select HDMI/DP and press ENTER to open the selections
Image 8-13
HDMI-Display port selection
Use the or key to select the desired input and press ENTER to select.
80
R5905032 HDX SERIES 02/03/2015