B&B Electronics X24-009PKC-EA Network Router User Manual


 
X09 & X24-009PKC-EA 0205ds - 1/2
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104 www.bb-elec.com orders@bb-elec.com support@bb-elec.com
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445
www.bb-europe.com orders@bb-elec.com support@bb-europe.com
PRODUCT INFORMATION B&B ELECTRONICS
X09-009PKC-EA shown
Models: X09-009PKC-EA, X24-009PKC-EA
Ethernet Radio Frequency Modems CE
Overview
Ethernet RF Modems contain an OEM RF Module that renders the modem the longest range performer in the RFd2d
(Radio Frequency device-to-device) segment of the wireless market . The integrated ethernet interface board extends
data system performance and flexibility by adding serial connectivity to Ethernet networks, with use of MaxStream serial
radio modems.
This RF Modem is optimized for mobile and remote applications, allowing OEMs and integrators to quickly test, monitor
and control their wireless systems via standard laptop and PC Ethernet ports. Additionally, the RF modem enables
worldwide access to wireless networks via the Internet.
The 900 MHz radio modem comes equipped with the best receiver sensitivity in the industry, making it one of the
longest range, low cost radio modems available. The 2.4 GHz radio modem can provide high performance and
dependable operation for deployment throughout the world
These radio modems are perfect for applications in automatic meter reading (AMR), supervisory control and data
acquisition (SCADA), home automation, security, instrument monitoring and point of sale (POS) systems among many
others. Ethernet RF Modems can be configured to integrate quickly and seamlessly into any new or existing design.
Features
Plug-and-communicate (no configuration required)
Ethernet interface
Compatible with other MaxStream RS-232 and USB modems
Transparent operation supports existing software & systems
Simple configuration using software & standard AT commands
Retries & acknowledgements for guaranteed packet delivery
Peer-to-peer, point-to-point & point-to-multipoint networks
Up to 65,000 network addresses available
Allows up to 7 Frequency Hopping Spread Spectrum
independent pairs (networks) to operate in close proximity
Low power modes for current consumption as low as 230 mA
XON / XOFF or hardware flow control
Signal strength reporting for link quality monitoring & debugging
Support for multiple data formats (7/8 bits, Even/Odd/No Parity)