Filter
Top Products
7
Belkin Enclosure - User Manual v 1.0.0ek P74789ec
EN
DE
FR
1. Removal of the stretch wrap. To prevent damage to the Enclosure, cut the stretch
wrap at one of the corrugated corners using a utility knife.
2. Remove the corrugated top and corners.
3. Remove the skid brackets from the skid, using a 1/2” (13mm) socket wrench. Remove
the hex from the Enclosure by using the 3/8” (10mm) socket wrench.
4. This step requires two or more people. With one person standing on each side of
the Enclosure, slowly roll the Enclosure to the back of the skid. Proceed until all four
casters contact the floor.
5. Verify that you have received all hardware and components with your Belkin Enclosure.
Contact Belkin support if you feel items are missing.
Unpacking your Enclosure
DETAIL A
A
DETAIL A
A
1
6
2
5
7
3
4
Mounting hardware and keys can be found in bag attached to one of the vertical mounting
rails.
Unpacking Instructions
1 Corrugated top
2 Stretch wrap
3 3/8” (10mm) hex
4 1/2” (13mm) hex
5 Corrugated corners
6 Shipping skid
7 Skid brackets