Belkin F1P1241EGAU Network Router User Manual


 
Self Help Guide
F1P1241EGau
F1P1210ENau
F1P1241ENau
IMPORTANT!
Before you begin
You will need:
• Belkin VoIP unit
• Power cable
• Network cable
Hardware check:
• Your computer is switched on
• The VoIP unit is switched on
(power switch at rear)
• Network cable connected
from computer to the VoIP unit
Step 1 Open your web browser (Internet Explorer, Mozilla FireFox, Safari etc)
Step 2 In the Address Bar, delete any text and type in 10.1.1.1 or
Click Here to open the page directly
Step 3 Type in your current password (default password = admin)
then click
LOGIN
Step 4 On the left hand side of the screen click Advanced Setup
Step 5 You will now be presented with more options in the menu on the left.
Click Tools then choose Configuration Tools
Step 6 Left click on Restore router to Factory Defaults and click Next
Step 7 Click Apply, the VoIP unit will now restore to factory defaults
and reboot.
Restore your Belkin VoIP unit to the factory default settings
This process may take up to 1-2 minutes
If you still require further assistance Call: 1300 554 780
contact Belkin Technical Support Visit: www.belkin.com/support
TSG xxx004a-rev1
Page 1 of 1