Filter
Top Products
4140
Manually Configuring your Modem
Manually Configuring your Modem
41
section
2
1
3
4
5
6
7
URL Blocking
To configure the URL
Blocking feature, use the
table below to specify the
web sites (www.somesite.
com) and/or keywords
you want to filter on your
network.
To complete this
configuration, you will
need to create or modify
an access rule in “Access
Control”. To modify an
existing rule, click the Edit
option next to the rule you
want to modify. To create a new rule, click on the Add PC option.
From the Access Control Page, Add PC section, check the option for
“WWW with URL Blocking” in the Client PC Service table to filter out
the web sites and keywords selected below, on a specific PC.
The Modem allows the user to block access to web sites from a
particular PC by entering either a full URL address or just a keyword.
This feature can be used to protect children from accessing violent or
pornographic web sites.
Schedule Rule
You may filter Internet
access for local clients
based on rules.
Each access control rule
may be activated at a
scheduled time. Define the
schedule on the Schedule
Rule page, and apply the
rule on the Access Control
page.
Click Add Schedule Rule.
Edit Schedule Rule
You can create and edit
schedule rules on this
page.
Define the appropriate
settings for a schedule
rule (as shown on the
above screen). The rule
in the screen shot above
prohibits emailing after
8.00am to 11.59pm. Upon
completion, click “OK” to
save your schedule rules.
Intrusion Detection
The Modem’s firewall
inspects packets at
the application layer,
maintains TCP and UDP
session information
including timeouts and
number of active sessions,
and provides the ability to
detect and prevent certain
types of network attacks
such as Denial-of-Service
(DoS) attacks.