Filter
Top Products
29
Alternate Setup Method
section
1
9
2
3
5
6
7
8
10
Step 1
Connecting your Gateway Router
1
.1
Turn off the power to your modem by unplugging the power supply
from the modem.
1.2
Locate the network cable that is connected between your modem and
your computer and unplug it from your computer, leaving the other end
connected to your modem.
1.3
Plug the loose end of the cable you just unplugged into the port on the
back of the Router labeled “Internet/WAN”.
1.4
Connect the included network cable from the back of the computer to
one of the ports labeled “1–4”.
Note:
It does not matter which numbered port you choose.
1.5
Turn your cable or DSL modem on by reconnecting the power supply
to the modem.
1.6
Before plugging the power cord into the Router, plug the cord into the
wall, then plug the cord into the Router’s power jack.
4
Supplied Blue Ethernet
cable (to computer)
Mac or PC
computer that
was originally
connected to
the cable or
DSL modem
Existing network cable
(that came with modem)
Cable or DSL
modem
To power adapter