THE FIRST THING YOU NEED TO KNOW BEFORE YOU BEGIN TO INSTALL…
1. Before installing, make sure your PC meets these requirements for hardware installation:
Microsoft Windows* 98SE, ME, 2000 or XP OS
Pentium® 166 MHz processor, equivalent or higher
Resource on your PC
At least one free Ethernet port for BIPAC-2060
Hard disk: 30 MB free hard drive space
Memory: 64 MB RAM or higher
CD-ROM drive
2. Your PC must not be configured for another network. This means that:
No network clients except for Microsoft Network*, Client for Netware* Networks, or Microsoft Family
Logon* are installed
No network services except file and printer sharing for Microsoft Networks or Personal Web Server*
are installed
No network protocols except Microsoft’s TCP/IP, IPX/SPX, NetBEUI, or Net BIOS support for IPX/SPX
are installed
3. Network installation requires two steps:
1. Install the software and adaptor
2. For each PC to be added to the network, repeat the process
4. Installation Note
Please verify that no other Encryption Management Utilities are installed before installing this product. If other
utilities are installed, uninstall them and restart before installing this software.
5. During installation, Windows may need some files that were not installed on your PC. Use the
Windows CD that precisely matches the version of Windows on the PC.
Caution: Using the wrong Windows CD will corrupt Windows on your PC.