Billion Electric Company BIPAC-2060 Network Card User Manual


 
3. Follow the instruction in the installation utility.
Windows 2000 users: Windows will inform you that there was no digital signature found. Click the Yes button
to proceed with the installation.
Windows XP users: Windows will notify you that the software has not passed Windows Logo testing. Click the
Continue Anyway button.
4. When prompted by the Install Utility, Plug in the BIPAC-2060.
To plug in the BIPAC-2060, you need to:
Plug the BIPAC-2060 into an AC outlet.
Plug the supplied Ethernet cable into the BIPAC-2060 and an available Ethernet port on your PC.
5. Click the Finish button to exit the installation utility
6. You may be asked to restart your computer. Click the Yes button to restart now, or click the No button to
restart later.
The installation of the BIPAC-2060 is complete.
To uninstall
To uninstall the software, follow these easy steps:
1. Insert the Setup utility CD-ROM into the computer’s CD-ROM drive. The setup page should show automatically.
2. It will detect the existing software on your machine and ask you whether you want to modify, repair or remove the
software. Select Remove.
3. Click Yes when the utility asks you to reboot the machine.