Filter
Top Products
BLADEOS 6.5.2 Application Guide
350 Chapter 25: Link Layer Discovery Protocol BMD00220, October 2010
LLDP transmissions can also be configured to enable or disable inclusion of optional information,
using the following command (Interface Port mode):
where type is an LLDP information option from Table 24:
By default, all optional LLDP information types are included in LLDP transmissions.
RS G8124(config)# interface port 1
RS G8124(config-if)# [no] lldp tlv <type>
RS G8124(config-if)# exit
Table 24 LLDP Optional Information Types
Type Description
portdesc Port Description
sysname System Name
sysdescr System Description
syscap System Capabilities
mgmtaddr Management Address
portvid IEEE 802.1 Port VLAN ID
portprot IEEE 802.1 Port and Protocol VLAN ID
vlanname IEEE 802.1 VLAN Name
protid IEEE 802.1 Protocol Identity
macphy IEEE 802.3 MAC/PHY Configuration/Status, including the
auto-negotiation, duplex, and speed status of the port.
powermdi IEEE 802.3 Power via MDI, indicating the capabilities and status of
devices that require or provide power over twisted-pair copper links.
linkaggr IEEE 802.3 Link Aggregation status for the port.
framesz IEEE 802.3 Maximum Frame Size for the port.
dcbx Data Center Bridging Capability Exchange Protocol (DCBX) for the port.
all Select all optional LLDP information for inclusion or exclusion.