Filter
Top Products
BLADEOS 6.5.2 Application Guide
310 Chapter 21: Protocol Independent Multicast BMD00220, October 2010
Using PIM with Other Features
PIM with ACLs or VMAPs
If using ACLs or VMAPs, be sure to permit traffic for local hosts and routers.
PIM with IGMP
If using IGMP (see “Internet Group Management Protocol” on page 249):
IGMP static joins can be configured with a PIM-SM or PIM-DM multicast group IPv4 address.
Using the ISCLI:
Using the CLI
IGMP Query is disabled by default. If IGMP Querier is needed with PIM, be sure to enable the
IGMP Query feature globally, as well as on each VLAN where it is needed.
If the switch is connected to multicast receivers and/or hosts, be sure to enable IGMP snooping
globally, as well as on each VLAN where PIM receivers are attached.
RS G8124(config)# ip mroute <multicast group IPv4 address> <VLAN> <port>
>> # /cfg/l3/mroute <multicast group IPv4 address> <VLAN> <port>