Filter
Top Products
6 - 8 NOVELL NETWARE PRINTING
Creating a Network Print Server (NDS Queue
Server) using BRAdmin Professional utility
1
Make sure that you logged in as
ADMIN
in NDS mode.
2
Start BRAdmin Professional utility.
3
One or more Print/Fax servers will appear in the list (the default
node names are
BRN_xxxxxx
, where
xxxxxx
is the last six
digits of the Ethernet address (MAC address)).
4
Select the printer that you wish to configure and double click it.
You will be asked for a password. The default password is
access
.
5
Select the
NetWare
tab.
a
If it is not already selected, select
Queue Server
as the
operating mode.
b
Select the correct NDS tree and NDS context (you can
manually enter this information, or by clicking on the down
arrow by the side of NDS tree and the
Change
button by the
side of NDS Context, you can let BRAdmin Professional utility
display your choices automatically). Once you have specified
this information, click on the
Change NDS queues
button.
c
In the
NetWare Print Queues
screen select the appropriate
TREE and Context and then click the
New Queue
button.
d
Enter the queue name and specify the volume name. If you
do not know the volume name, select the
Browse
button to
browse the NetWare volumes. When the information is
entered correctly, select the
OK
button.
You can find the node name and MAC address by printing
out the printer configuration page. For information on how to
print the configuration page on your machine, see Resetting
the Print/Fax Sever back to factory settings (Test Switch) on
page 13-4.