Filter
Top Products
36
EXAMPLE
With the Frame function, you can choose from various frames and highlights to design a more
decorative or emphasised label.
The default setting is OFF; however, 5 frame settings are also available. Refer to Reference at
the end of this section for samples of the available settings.
When any setting other than OFF is selected, the indicator on the right side of the display
comes on.
To change the frame setting:
1 Rotate + until 06/18 FRAME is displayed, and then press + to display the current
frame setting.
2 Rotate + until the desired frame setting is displayed, and then press + to apply it to
the text.
OR
1 While holding down c, press 6 once, and keep c held down to display the
current frame setting.
To select the ON underline setting:
1
While holding down c, press 5 once,
and keep c held down.
2 While still holding down c, continue pressing
5 until ON is displayed.
3 Release c.
OFF
UNDL
ON
UNDL
FRAME FUNCTION
ABC