Filter
Top Products
4 - 5 CONTROL PANEL
We recommend that you add more RAM if you want to be able to print a lot of secure data. (See Memory
expansion on page 2-26.)
Reprinting the last job
You can reprint the data from the last print job without sending it from the computer again.
■ If REPRINT function is set to OFF on the control panel and you press the Reprint button, the
LCD shows NO DATA STORED for a short time.
■ If you want to cancel reprinting, press the Job Cancel button.
■ If the printer does not have enough memory to spool the print job data, it will only print the last
page.
■ Pressing the - or + button makes the number of reprint copies decrease or increase. You can
select between 1 and 999 copies.
■ For more information about the settings in the printer driver, see Job Spooling on page 3-5.
Reprint the last job three times
1
Turn the REPRINT function ON by using the control panel buttons to go to the SETUP menu.
If you print using the driver we have supplied with the printer, the settings for Job Spooling in the
printer driver will take priority over the settings made on the control panel. For more information, see
Job Spooling on page 3-5.
2
Press the Reprint button.
■ If you press the Go button twice, the printer will exit the REPRINT setting.
■ If you want to reprint the data and have pressed the Go button, the display shows PRESS SET
TO PRINT. Press the Set or Reprint button to start reprinting, or press Go again to cancel the
reprint job.
↓
-REPRINT-
COPIES=______1
If you wait too long to continue the control panel button operation, the display
exits the REPRINT setting automatically.
↓
Press the + button twice.
-REPRINT-
COPIES=______3
↓
Press the Set or Reprint button.
PRINTING
↓
-REPRINT-
COPIES=______1