Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–41
Select the data ID with the ▲ or ▼ switch and press the SET switch. The
printer will then save the received data with the ID on the card.
✒ Note
• When you see an asterisk on the display, the ID number has been used
for other data or a macro. If you select the used ID number, the old
data or macro is erased and replaced with the new data.
• Once the data is saved, you can execute it with “EXECUTE DATA” or
with a data execution command.
• The data saved in the SAVE DATA mode can not be run with the
macro execution command in HP LaserJet emulation.
• Save Macro
✒ Note
The “SAVE MACRO” menu appears only in the HP LaserJet emulation
mode.
If you have downloaded a macro in the printer’s memory, you can save the
macro on the installed flash memory card or HDD card.
If a macro has been downloaded in the printer’s memory and you press the
SET switch at “SAVE MACRO,” the printer prompts you to select the ID
of the macro.
MACRO ID=#####
Select the ID with the ▲ or ▼ switch and press the SET switch again, so
that the printer saves the macro with the selected ID.
✒ Note
When you see an asterisk on the display, the ID number has been used for
another macro or data. If you select the used ID number, the old macro or
data is erased and replaced with the new macro.
You can execute a macro with the macro execution command.