Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–49
CONTINUE MODE
If any recoverable error occurs including “Toner Empty,” it can be cleared
with the CONTINUE switch. The CONTINUE switch function is selected
with this mode setting.
Display Message Continue Mode
CONTINUE=MANUAL Select the manual or auto error recovery
mode. Press the CONTINUE switch to clear
errors. (Factory setting)
CONTINUE=AUTO Select the auto error recovery mode. The
printer automatically clears recoverable
errors. You need not press the CONTINUE
switch.
SCALABLE FONT
✒ Note
The setting in this mode menu is effective only in the HP LaserJet mode.
It does not appear in any other emulation modes.
Since this printer has many scalable fonts, some application programs may
not be able to handle them correctly. When the HP LaserJet emulation
mode has been selected, the printer may print a different font rather than
the font you have selected with your program (or the font selection
command).
To cope with this font problem, you can restrict the font selection by this
command as follows:
Display Message Scalable Font
FONT=ALL All scalable fonts of this printer can be
selected with the font selection command.
(Factory Setting)
FONT=LJ Scalable fonts of this printer other than the
following can be selected with the font
selection command: Atlanta, Bermuda
Script, PC Brussels, Copenhagen, Germany,
Portugal, Calgary, San Diego, and US
Roman.
Even if you restrict the font selection as above, you can select among all
the scalable fonts with the FONT switch. The setting in this mode menu
merely restricts the font selection command.