Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–55
5.Press the SET switch.
When you enter the “SELECT FONT” menu, you can select the
internal font, optional slot font, or permanent download font. The
display shows the following message.
INTERNAL FONT p*
Press the ▲ or ▼ switch until the desired font source appears on the
display.
Display Message Font Source
INTERNAL FONT Internal font of the printer
CARD1 FONT Optional font card in slot 1
CARD2 FONT Optional font card in slot 2
PERMANENT FONT Permanent download font defined
in the HP emulation mode
Since these steps instruct you to select the standard font, select the
“INTERNAL FONT” message.
✒ Note
When you select the optional fonts or permanent download fonts, note the
following:
• If the optional font card is not installed, the optional font cannot be
selected. No selection appears on the display.
• If permanent fonts are not downloaded in the HP emulation mode or
another emulation mode is selected, they cannot be selected. No
selection appears on the display.
• The list you can print out with the TEST switch helps you to select the
optional fonts or permanent download fonts. See “TEST switch” in
this chapter or “Selecting the Optional Fonts” in Chapter 5.
6.Press the SET switch.
When you enter the font setting mode, the display first shows the
current font with an asterisk.
BROUGHAM p*
7.Press the ▲ or ▼ switch until the desired font appears on the display.