Brother QL-500 Printer User Manual


 
CHAPTER 4 CONTROL PANEL
4–59
3.Press the SET switch.
When you enter the SELECT FONTmenu, you can select the
internal font, optional slot font, or permanent download font. The
display shows the following message.
INTERNAL FONT *
Press the or switch until the desired font source appears on the
display.
Display Message Font Source
INTERNAL FONT Internal font of the printer
CARD1 FONT Optional card font in slot 1
CARD2 FONT Optional font card in slot 2
PERMANENT FONT Permanent download font defined
in the HP emulation mode
Since these steps instruct you to select the standard font, select the
“INTERNAL FONTmessage.
Note
When you select the optional fonts or permanent download fonts, note the
following:
If the optional font card is not installed, the optional font cannot be
selected. No selection appears on the display.
If permanent fonts are not downloaded in the HP emulation mode or
another emulation mode is selected, the permanent fonts cannot be
selected. No selection appears on the display.
When you select the optional font or download font, press the SET
switch to enter the sub-menu. After you select your desired one with
the or switch, press the SET switch again. The list you can print
out with the TEST switch helps you to select the optional fonts or
permanent download fonts. See “TEST switch” in this chapter or
“Selecting the Optional Fonts” in Chapter 5.
4.Press the SET switch.
When you enter the font setting mode, the display first shows the
current font with an asterisk.