Brother QL-500 Printer User Manual


 
CHAPTER 2 GETTING STARTED
2–9
5.Hold the tab firmly and pull it out until the sealing tape comes out all
the way.
Fig. 2-13 Pulling Out the Sealing Tape
!
Caution
If the tab breaks from the sealing tape, hold and pull out the tape. If your
hands or clothes get dirty with toner, wipe or wash it off immediately
with cold water.
6.Insert the toner cartridge in the direction of the arrows engraved on
the cartridge into the side guides until it stops securely in the cartridge
holder inside the printer.
Note
Push both sides of the toner cartridge gently until the cartridge is seated in
its place.
Fig. 2-14 Inserting the Toner Cartridge