Filter
Top Products
Printing photos from a memory card
35
4
b Press a or b to choose
2.PhotoCapture.
Press OK.
c Press a or b to choose
7.Color Enhance.
Press OK.
d Press a or b to choose On (or Off).
Press OK.
If selecting Off, then go to g.
e Press a or b to choose
1.White Balance, 2.Sharpness or
3.Color Density.
Press OK.
f Press a or b to adjust the degree of the
setting.
Press OK.
g Press Stop/Exit.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will effect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other colour. By using this, you can
correct this effect and bring the white
areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Colour Density
This setting adjusts the total amount of
colour in the image. You can increase or
decrease the amount of colour in an
image to improve a washed out or weak
picture.
Cropping 4
If your photo is too long or wide to fit the
available space on your chosen layout, part
of the image will be automatically cropped.
The default setting is On. If you want to print
the whole image, turn this setting to Off.
a Press Menu.
b Press a or b to choose
2.PhotoCapture.
Press OK.
c Press a or b to choose 8.Cropping.
Press OK.
d Press a or b to choose Off (or On).
Press OK.
e Press Stop/Exit.
Cropping: On
4
Cropping: Off 4