Filter
Top Products
39
5
5
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
Before Using
PictBridge 5
PictBridge requirements 5
To avoid errors, remember the following
points:
The machine and the digital camera must
be connected using a suitable USB cable.
The image file extension must be .JPG
(Other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
PhotoCapture Center operations are not
available when using the PictBridge
feature.
Using PictBridge 5
Setting your digital camera 5
Make sure your camera is in PictBridge
mode. If your camera is set to use the printer
settings, the following PictBridge settings are
available for your PictBridge compatible
camera.
1
Please See DPOF printing on page 40 for more
details.
2
When the Colour Enhancement setting is selected in
your camera. you can set White Balance, Sharpness
and Colour Density using the PhotoCapture menu in
the machine. (See Colour Enhancement on page
34.)
Note
Depending on your camera some of these
settings may not be available.
The names and availability of each setting
depends on the specification of your
camera.
The cropping setting is only available from
the machine menu. (See Cropping on
page 35.)
Please refer to the documentation supplied
with your camera for more detailed
information on changing PictBridge settings.
Printing photos from a camera
with PictBridge
5
Menu Selections Options
Paper Size Letter, A4, 10×15cm
Paper Type Plain Paper, Glossy
Paper, Inkjet Paper
Layout Borderless: On,
Borderless: Off
DPOF setting
1
–
Print Quality Normal, Fine
Colour
Enhancement
2
On, Off