Filter
Top Products
54
Ghost
Make sure that you use paper that meets our specifications. Rough-
surfaced paper or thick paper may cause the problem. (See
Acceptable paper and other media on page 9.)
Make sure that you choose the correct media type in the printer driver
or in the machine’s Paper Type menu setting. (See Acceptable paper
and other media on page 9 and Basic tab in the Software User’s
Guide on the CD-ROM.)
The drum unit may be damaged. Put in a new drum unit. (See
Replacing the drum unit on page 101.)
The colour of your printouts are
not what you expected.
Make sure that the toner cartridges are installed properly. (See
Replacing a toner cartridge on page 96.)
Make sure that the toner cartridges are not empty. (See Toner life end
message on page 96.)
Make sure that the drum unit is installed properly. (See Replacing the
drum unit on page 101.)
Make sure that the belt unit is installed properly. (See Replacing the
belt unit on page 108.)
Perform the calibration by using the control panel. Press Menu, 3, 5.
a Press OK to select Calibrate.
b Press 1 to select Yes.
(For more information, see Software User’s Guide on the CD-ROM.)
Adjust the colour by using the custom setting in the printer driver.
Colours the machine can print and colours you see on a monitor are
different. The machine may not be able to reproduce the colours on
your monitor.
Make sure that you use paper that meets our specifications. (See
Acceptable paper and other media on page 9.)
The drum unit may be damaged. Put in a new drum unit. (See
Replacing the drum unit on page 101.)
Put in a new belt unit. (See Replacing the belt unit on page 108.)
All one colour Clean the corona wires of the drum unit for the colour causing the
problem. (See Cleaning the corona wires on page 82.) If the print
quality has not improved, put in a new drum unit. (See Replacing the
drum unit on page 101.)
The drum unit may be damaged. Put in a new drum unit. (See
Replacing the drum unit on page 101.)
Examples of poor print
quality
Recommendation