Filter
Top Products
7 - 8
AUTO DIAL NUMBERS AND DIALING OPTIONS
Multiple Resolution Transmission
Use this feature to select separate resolution settings for each page of the fax you’re
sending. This could be useful if you’re sending a fax with photos and letters, or some
pages with small print and others with normal print. Resolution settings return to
STANDARD after the fax is sent. (See Resolution, page 6-6)
1
Insert the originals in the feeder, and then press
Menu/Set, 3, 4.
2
Use to select resolution for page 1, and then press Menu/Set.
3
Repeat Step 2 for subsequent pages.
4
Press Stop/Exit when you’re finished. The
LCD shows
5
Press 1 if you want to select additional settings.
The LCD returns to the SETUP SEND menu
—OR—Press 2 if you are finished choosing
settings, and go to Step 6. The LCD prompts
you to enter the fax number you want to call.
6
Enter the fax number you’re calling.
7
Press Fax Start.
Pause
Press Redial/Pause to insert a pause between numbers. Each key press adds a 3.5
second delay.
Hold
1
Press Hold/Caller ID to put a call on Hold.
2
You can put down the handset without disconnecting the call.
3
Pick up the fax machine handset to release the call from Hold. Picking up an extension
handset will not release the call from Hold.
To copy an original using multiple resolutions, press Copy in Step 6.
4.RESOLUTION
or
OTHER SETTINGS?
ACCEPTED