Filter
Top Products
60 Chapter 11
Setting the Maximum Time for Incoming Messages
Your machine comes set to receive voice messages up to 35 seconds long. You can change this
setting to any length from 35 seconds to 60 seconds, from 20 seconds to 60 seconds (for Ireland), in
5-second increments.
1
Press Menu/Set, 8, 4. The screen prompts you to select a maximum time.
2
Press or to select the maximum time setting for incoming messages, and press Menu/Set
when the screen displays your setting.
3
Press Stop to exit.
Setting the Toll Saver
When you set the Toll Saver feature, the machine answers after 4 rings if you don’t have messages,
and after 2 rings if you do have messages. This way, when you call the machine, if it rings 3 times,
you know you have no messages, and can hang up, avoiding any toll charge.
1
Press Menu/Set, 2, 1.
2
Press or to select TOLL SAVER (or RING DELAY), and press Menu/Set when the
screen displays your selection.
3
Press or to select ON (or OFF), and press Menu/Set.
4
Press Stop to exit.
ICM Recording Monitor
This feature lets you turn OFF (or ON) the speaker volume for voice messages. When you turn the
monitor OFF, you will not hear messages as they come in.
1
Press Menu/Set, 8, 5.
2
Press or to select OFF (or ON), and press Menu/Set when the screen displays your
selection.
3
Press Stop to exit.
Recording a Conversation
You can record a telephone conversation by pressing Play/Record during the conversation. Your
recording can be as long as the Incoming Message Maximum Time. The other party will hear a beep
every 15 seconds while recording. You cannot record a conversation using the Speakerphone.
When Toll Saver is
ON
, it overrides your Ring Delay setting. Toll Saver must be
off for the machine to operate using your Ring Delay setting.
See “Setting the
Ring Delay” on page 25.