Filter
Top Products
106
Custom features on a single line. If you have Call Waiting, Call Waiting/Caller ID, an alarm system or any other
custom feature on a single telephone line with your machine, it may create a
problem sending or receiving faxes.
For example: If you subscribe to Call Waiting or some other custom service and
its signal comes through the line while your machine is sending or receiving a fax,
the signal can temporarily interrupt or disrupt the faxes. Brother's ECM (Error
Correction Mode) feature should help overcome this problem. This condition is
related to the telephone system industry and is common to all devices that send
and receive information on a single, shared line with custom features. If avoiding
a slight interruption is crucial to your business, a separate telephone line with no
custom features is recommended.
Menu Setting Difficulties
Difficulty Suggestions
The machine beeps when you try to
access the Setup Send or Setup
Receive menu.
If the Fax key is not illuminated, press it to turn on Fax mode. The Setup
Send or Setup Receive setting is available only when the machine is in Fax mode.
Copying Difficulties
Difficulty Suggestions
Cannot make a copy
Make sure that the Copy key is illuminated. (See Entering Copy mode
on page 66.)
Vertical streaks appear on copies If you see vertical streaks on copies, clean the scanner. (See Cleaning the
scanner glass on page 122.)
Poor copy results when using the
ADF
Try using the scanner glass. (See Using the scanner glass on page 18.)
Vertical black line appears in
copies
Vertical black lines or streaks on copies are typically caused by dirt or correction
fluid on the glass strip. Clean the glass strip and scanner glass and the white bar
and white plastic above them. (See Cleaning the scanner glass on page 122.)
Fit to Page does not work properly. Make sure that the document is not skewed on the scanner glass.
Scanning Difficulties
Difficulty Suggestions
TWAIN/WIA errors appear when
starting to scan.
Make sure the Brother TWAIN/WIA driver is chosen as the primary source. In
Presto!
®
PageManager
®
with OCR, click File, Select Source and choose the
Brother TWAIN/WIA driver.
OCR does not work. Try increasing the scanner resolution.
Poor scanning results when using
the ADF.
Try using the scanner glass. (See Using the scanner glass on page 18.)
Handling Incoming Calls (continued)
Difficulty Suggestions