Filter
Top Products
CE Labs, Inc. SW204HD Matrix Switch
Controlling and Monitoring the SW204HD
Once connected, the SW204HD may be controlled using the Power, and Select Buttons. The current Power
status of the SW204HD is shown next to the Connect status.
If power is off, then the following status appears.
To toggle power, simply click the power button. Before any other controls can be used the Power must be ON.
When power is ON, then the Output Select buttons can be used to change the switch settings. The numbered
input indicators may also be clicked to change switch settings.
Click the buttons to perform the desired operation.
You may also click the numbered indicators to change directly to an input.
The Power Button toggles the power on the SW204HD.
The Output Select Buttons set the next input for the output. That is, if Output Select 1 is clicked, the switch will
step to the next Input in order for output 1. When the input is on 4, it will step to 1.
When power is off, the controls will not function and the numbered input indicators will be grayed –out.