Filter
Top Products
Setting Up a Computer for Printing/Sending a Fax
5-10
5
Using a NetBIOS Network
2
Install the driver.
Install the driver according to the following procedures indicated in the manual
for each driver. (The UFR II printer driver is not available for Windows 98/Me.)
• If you want to use the PCL printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in
the
PCL Driver Guide
.
• If you want to use the PS printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in
the
PS Driver Guide
.
• If you want to use the UFR II printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in
the
UFR II Driver Guide
.
• If you want to use the fax driver
See the procedure for standard installation in Chapter 2, "Getting Started," in
the
Fax Driver Guide
.
When the dialog box for selecting the port appears during installation, click [Use
Network Printer] ➞ [Settings]. From the list, select [Workgroup], [Server], and
[Printer] you set in "SMB and WINS Settings," on p. 5-3.
Mac OS X 10.3 or later
If you are using the optional PS Printer Kit, and a PS printer driver provided by
Apple Computer, Inc., you can use SMB as the print application. After installing the
PPD file according to the Network Quick Start Guide, specify the print settings
according to the instructions in the documentation provided with your Macintosh.