Canon 2163B002 Printer User Manual


 
Chapter 7
7-6
F-7-6
7.1.3 Details for Service mode
0015-1986
This section provides details of the Service mode menus.
a) DISPLAY
Displays and prints the printer information.
1) PRINF INF
Prints adjustment values in the User menu, [DISPLAY] and [COUNTER] parameters on A4-size or lager paper.
When a roll media is used, the layout is optimized according to the media width.
2) SYSTEM
Displays the printer information shown below.
T-7-1
3) HEAD
Displays the following EEPROM information of the printhead.
T-7-2
4) INK
Displays the numbers of days passed since installation of the following ink tanks.
T-7-3
Display Description Unit
S/N Serial number of printer -
TYPE Type setting on main controller PCB
* iPF8000 is represented by 44.
-
LF TYPE Feed roller type: 0 or 1 -
TMP Ambient temperature degrees C
SIZE LF Detected size of loaded media (feed direction)
0 is always detected for the roll media.
mm
SIZE LF Detected size of loaded media (feed direction)
0 is always detected for the roll media.
inch
SIZE CR Detected size of loaded media (carriage scan direction) mm
SIZE CR Detected size of loaded media (carriage scan direction) inch
Display Description
S/N R Serial number of printhead R
S/N L Serial number of printhead L
LOT R Lot number of printhead R
LOT L Lot number of printhead L
Display Description Unit
BK Number of days passed since the BK ink tank was installed Day(s)
MBK Number of days passed since the MBK ink tank was installed Day(s)
SETTING
Pth
ON
OFF
RTC
DATE
TIME
INITIALIZE
WARNING
ERROR
ADJUST
W-INK
CARRIAGE
PURGE
INK-USE CNT
CUTTER-CHG CNT
W-INK-CHG CNT
HEAD-CHG CNT
PARTS-CHG CNT
PARTS A
PARTS K1
PARTS M1
PARTS P1
PARTS H1
PARTS D
PARTS V1
PARTS COUNTER
(COUNTER)
PARTS A
PARTS K1
PARTS M1
PARTS P1
PARTS H1
PARTS D
PARTS V1