Filter
Top Products
Chapter 1
1-9
1.6.2 Main menu
0014-8840
The printer has a Main Menu which provides the user with access to various adjusting and configuring features, for example: adjusting print position; performing
cleaning or other maintenance features; auto-cutting, ink drying time and other print settings; message language and other parameter settings.
1. Main menu operations
a) How to enter the Main Menu
To enter the Main menu, press the [Menu] button.
b) How to exit the Main Menu
Press the [Online] button to exit the Main menu.
c) Buttons used in the Main Menu
- Selecting menus and parameters: [ ] button or [ ] button
- Entering a higher-level menu: [ ] button
- Entering a lower-level menu: [ ] button
- Setting menus and parameters: [OK] button
2. Map of the main menu
The hierarchy of menus and parameters in the Main Menu is as shown below.
[2] Data lamp (green) Flashing(when printing) :this lamp indicates that the printer is receiving or processing a print job.
Flashing(when not printing):this lamp indicates that the print job is paused or firmware data is being received.
Off:This indicates that there is no print job.
[3] Message lamp (orange) On:This indicates that a warning message is displayed.
Flashing:This indicates that an error message is displayed.
Off:This indicates that the printer is normal or the power is turned off.
[4] Roll media lamp (green) On:This indicates that the or roll media is selected as the paper source.
Off:This indicates that the or cut sheet is selected as the paper source.
[5] Cut sheet lamp (green) On:This indicates that the or cut sheet is selected as the paper source.
Off:This indicates that the or roll media is selected as the paper source.