Canon 4507B002 Scanner User Manual


 
Package Contents
1
Scanner
2 USB Cable
3 Setup CD-ROM
4 Quick Start Guide (this document)
Installing the Software
• Do NOT connect the scanner to a computer before installing the software. If you connect the scanner, unplug the USB cable from the
computer. When the Found New Hardware screen appears, unplug the USB cable from the computer and click Cancel. The screen
may close automatically when the USB cable is unplugged.
• Quit all running applications before installation.
• For Windows: Uninstall software bundled with the Canon scanner before upgrading from Windows Vista to Windows 7, then, install the
bundled software again.
• For Macintosh: After upgrading from Mac OS X v.10.5 or lower to Mac OS X v.10.6, install software bundled with the Canon scanner.
• Log in as an administrator to install the software.
• Do not switch users during the installation process.
1 Place the Setup CD-ROM in the drive.
For Macintosh: Double-click the Setup icon. Enter the administrator ID and password on the authentication dialog box.
For Windows XP and Macintosh, skip step 2 and go to step 3.
2 For Windows 7/Windows Vista, when the AutoPlay dialog box (*1) appears, run the setup program, and then click Yes
or Continue to proceed when the User Account Control dialog box (*2) appears.
3 If prompted, select your language and place of residence, and then click Next.
In some countries, these dialog boxes will not appear.
4 Click Easy Install on the main menu (*3).
5 Click Install to start installation.
Carefully read the License Agreement, and then click Yes to proceed.
For Macintosh, skip step 6 and go to step 7.
6 For Windows, carefully read the Please Allow All Install Wizard Processes screen, and then click Next.
7 Follow the on-screen instructions to perform the installation.
8 For users in the U.S.A., when the User Registration screen appears, follow the on-screen instructions to ensure
product support.
9 When the Extended Survey Program screen appears, confirm it.
If you can agree, click Agree.
10When the installation is complete, follow the on-screen instructions.
For Windows: Click Exit.
For Macintosh: Click Exit. If you click OK on the Canon Solution Menu EX dialog box, Solution Menu EX will appear.
<Solution Menu EX>
You can select either MP Navigator EX, "On-Screen Manual", or the Online Registration.
* The Online Registration is available for users in the U.S.A. only.
For Windows: When you start up your computer next time, Solution Menu EX will appear automatically. When you restart your computer,
perform the operation of "Preparing the Scanner" in advance.
If only Help & Settings menu is displayed in Solution Menu EX, connect the scanner to your computer and wait a while, and then refer to
the Solution Menu EX online help and set up the scanner.
For Macintosh: If the Canon Solution Menu EX icon is not found in the Dock, you can start Solution Menu EX from "About Solution Menu
EX" in "On-Screen Manual". To add the Canon Solution Menu EX icon to the Dock, refer to the Solution Menu EX online help.
Preparing the Scanner
1
Slide the lock switch on the bottom of the scanner toward the unlock mark ( ).
Always lock the scanner when carrying or transporting it.
2 Connect the scanner to your computer with the supplied USB cable.
Only use the USB cable provided with the scanner. Use of other cables may lead to a
malfunction.
Do not touch the metallic parts of the USB connector.
The scanner does not have a power switch. The power is activated as soon as the
computer is turned on.
When the scanner is connected to the USB 1.1 port and This device can perform
faster or HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub message
appears, ignore the message. The scanner operates in this condition without problems.
Try Scanning
1
Place a color photo document with the side to be scanned facing down on the
platen glass at least 0.4 in. (1 cm) away from the edges of the platen glass, and
then close the document cover.
2 Start MP Navigator EX.
For Windows: Double-click the Canon Solution Menu EX icon, and then click the MP
Navigator EX 4.0 icon under Start Application menu.
For Macintosh: Click the Canon Solution Menu EX icon in the Dock, and then click the
MP Navigator EX icon under Start Application menu.
3 Click Photos/Documents (Platen).
4 Select Color Photo in Document Type.
5 Click Scan to start scanning.
Do not move the scanner while it is operating.
Do not see the light source directly during a scan job.
6 When prompted that the scanning completed, click Exit.
7 Click Save to save the images and close MP Navigator EX (*1).
See the back page for the instructions for "Using the Scanner Buttons".
Quick Start Guide
*1
*2
*3
Bottom
Top
*1
QT5-3118-V01 XXXXXXXX ©CANON INC. 2010 PRINTED IN VIETNAM