Filter
Top Products
Assembling the Machine
1-51
Before You Start Using This Machine
1
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
• When the date is displayed on the LCD display, the machine is in the Standby
mode and ready for normal operation. If the Error lamp starts blinking red, wait for
one of the following messages to appear.
Message Description
INSTALL CARTRIDGE You have not yet installed the toner cartridge. Install the FX7
toner cartridge. (See “Installing the Toner Cartridge,” on p.
1-35.)
REPLACE
CARTRIDGE
The toner cartridge has run out of toner. Replace the toner
cartridge.
CHECK PRINTER
COVER
The printer cover is not closed completely. If it does not close
easily, do not force it. Remove the toner cartridge, and insert it
again. Make sure it is sitting level inside the main unit, and
close the printer cover again.
SUPPLY REC. PAPER At least one of the paper cassettes is empty or not seated
correctly inside the machine. Remove each cassette. Make
sure the stacks of paper are below the tabs, and insert the
paper cassettes again. Push the paper cassettes all the way
into the machine until they lock into place.