Filter
Top Products
System Configuration and Parts
1-15
Before You Start Using This Machine
1
Control Panel Parts
a Control Panel Power Switch (Sub Power Supply)
Press to turn the control panel ON or OFF. When turned
OFF, the machine is in the Sleep mode.
b Counter Check key
Press to display the copy and print count total on the touch
panel display.
c Stop key
Press to stop a job in progress, such as a scan job, copy job,
or fax job (scanning only).
d Start key
Press to start an operation.
e Main Power Indicator
Lights when the main power is turned ON.
f Error Indicator
Flashes or lights if there is an error in the machine. When
the Error indicator flashes, follow the instructions that
appear on the touch panel display. When the Error indicator
maintains a steady red light, contact your local authorized
Canon dealer.
g Processing/Data Indicator
Flashes or blinks green when the machine is performing
operations, and maintains a steady green light, when fax
data is stored in memory.
h Clear key
Press to clear entered values or characters.
i Numeric keys
Press to enter numerical values.
j ID key
Press when setting or enabling Department ID
Management.
k Display Contrast Dial
Use to adjust the brightness of the touch panel display.
l Additional Functions key
Press to specify additional functions.
m Help key
Press to display explanations of modes or functions on the
touch panel display.
n Reset key
Press to restore the standard settings of the machine.
o Touch Panel Display
The settings screen for each function is shown on this
display.
Press to restore the standard settings of the machine.
p Edit Pen Tray
Place the edit pen here.
q Edit Pen
Use to press keys on the touch panel display, such as when
entering characters. If you lose the edit pen, contact your
local authorized Canon dealer. Do not use an object with a
sharp end, such as a pencil or ballpoint pen, instead of the
edit pen.